The Benefits of a Central AC Unit

A central air conditioning system utilizes ductwork to bring cooled air to each room. An air handler with filters that trap particulates regulates the airflow.

The unit is usually located in a small enclosure outside the home. The unit’s quiet operation will increase your comfort, since it will stop the constant hum and whirrrr of window AC units from disrupting indoor peace.

Energy Efficiency

Although central air conditioners consume more energy than wall-mounted units do, modern systems are more efficient than ones of the past. The ozone-depleting R22 refrigerant was eliminated by 2006 and replaced with 410A. Manufacturers are constantly developing new technologies to make their systems more efficient and use less energy.

Contrary to window AC units specifically designed to cool only the room in which they are installed central AC systems can evenly distribute cool air throughout your entire home by using air ducts. The cooling process begins when your thermostat signals that the air handler must start cycling. The air handler pulls warm air from your living areas, and it passes over the evaporator coil, which is filled with cool refrigerant. The heat in the air causes refrigerant absorb energy, and then transform into a gas. The compressor then raises the temperature and pressure of the refrigerant. When it pumps it pushes the heat out of the evaporator coil and back into the house where it is cooled before being circulated through the ductwork.

The truth is that central AC systems are the most efficient choice for regulating the temperature of large spaces. They are able to continuously cool rooms that are farther away than a single wall AC unit can, and they offer better energy efficiency in general.

Depending on how well your home is sealed and insulated, and the layout of your home it’s possible that a mini-split system can save you even more energy than central air conditioners, though. Mini-splits are different from central ACs, but they can be more efficient because they don’t require ductwork. Ductwork leaks and can make the system overwork to cool your home to the desired temperature. If you’re interested to learn more about energy-efficient options to cool your home, speak to an HVAC expert at your local Dallas heating and air conditioning business. They can assist you in finding the ideal solution for your requirements.

Convenience

In addition to the energy efficiency and comfort central air conditioning systems also provide lots of convenience. They can cool the entire home or business with one unit, and do not require vents like window units. They are also fitted with high-quality filters that help keep allergens and pollutants out of the air. This is particularly helpful for those suffering from allergies or respiratory ailments.

Central AC is one of the most well-known kinds of cooling systems and with good reason. It is a great choice for homes with ductwork that require an effective cooling solution. These systems can cool all rooms with a single vent. They can also be used with thermostats that are zoned for home use that let you manage the cooling needs of different areas within your home.

This is the most commonly used kind of AC system that operates in a similar manner to furnaces. A central air conditioner has an outdoor unit that blows warm air, and an indoor air handler that pulls in cold or hot air through the ductwork. The refrigerant is pumped from the air handler via lines, absorbing heat. The cooled air is pushed back to the air handler in the home and circulated through the ductwork to other rooms.

A central air conditioning system can also reduce humidity. This is especially crucial in our humid climate. The air handler can eliminate excess moisture, and then release it outside which prevents the growth of mold and mildew in your ductwork.

It’s time to upgrade your cooling system if it’s older than 15 years. A new, high-end AC system can help you reduce your energy bills as well as safeguard the integrity of your ductwork. For more information about Chancey & Reynolds’ cooling solutions, call us. We can help you choose the right air conditioner for your needs and budget.

Maintenance

Just like any major appliance air conditioner, your air conditioner requires regular maintenance to run smoothly. Some routine maintenance tasks can be performed by the homeowner, however, other tasks should be left to licensed professionals. Signing an agreement for maintenance is the best method to keep on top of AC problems. These agreements typically offer discounts on repairs, as well as other benefits, like priority scheduling.

Clean the Condenser Unit

A dirty condenser will reduce air flow, decrease the efficiency of your system and increase the cost of energy. Before you begin cleaning, switch off the compressor unit to avoid dirt and debris from accumulating. Then with a garden hose, gently clean the fan blades and coil fins to remove dirt leaves, twigs and other debris. After washing then, use a towel and sanitation spray to clean and disinfect the fan blades. It is also recommended to straighten any bent fins that may result from winds, or other weather conditions.

Line Sets

If your central air conditioner is more than 10 years old, it is recommended to consult a professional to inspect the line sets, as well as the copper tubes that connect the indoor air conditioning evaporator coil to the outdoor compressor and condenser unit. The lines carry refrigerant and any cracks or rust can cause leaks, which can result in poor cooling and high utility bills.

Air Filter

Change your air filter regularly to ensure it is fresh and improve the efficiency of your air conditioning system. The frequency of change varies based on how often the AC runs, the amount of furry family members and the amount of dust is accumulated in your home. A typical air filter should last about two weeks to one month during the cooling season.

Condensate Drain Line

If the drain line for your condensation becomes clogged by algae, mold or bugs, the accumulated water on the evaporator coil will not be able to be flushed away. This can lead to flooding of your basement, water damage to your home, and even mold and mildew growth. To avoid this, the float switch located near your indoor evaporator coil will stop the system when it senses that the drain line is clogged.